The Mechanical Engineer shall manage Mechanical engineering works & team from project start to finish which encompasses tender preparation, submission, clarification, system design, budgeting, project management, site coordination, client management and worker management with a strong leadership and organizational skills.

The scope shall encompass the following:

Job description:

• Responsible in managing all Mechanical engineering works for the projects from concept stage, design development, contract documentation, authority submissions, site administration, and project management to project completion.
• Lead and manage the team including performance appraisal and manpower planning for the project.
• Prepare scope of work, sub-contracts, and customer proposals including Preliminary Design and Tender preparation, submission and Tender Clarification follow up for Mechanical works.
• Prepare and monitor project budgets for Mechanical works including equipment selection, etc.
• Participate in engineering process to control cost and client budget requirements of project.
• Develop Mechanical works’ project schedule and monitor/update as project progresses, and forecasting engineering activities and procurement of materials required for project to ensure timely completion of project.
• Preparing and providing technical interpretation of design documents in support of installation such as checking of drawings, preparation of data sheets for client approval, project BOM, SOW for subcontractor.
• Design and detailed design including equipment selection, duct and pipe sizing, and work with drafting team on the development of construction and shop drawings.
• Review method statement for construction activities and Safe Work Procedure for operational plant & Construction site.
• Provide specific expertise for problem solving of mechanical issues.
• Provide technical evaluation of subcontractor and equipment proposals.
• Monitor and inspect construction to ensure compliance with design documents.
• Perform Testing & Commissioning works.
• Coordination and liaise with Architects/ Consultants / Main Contractors / Vendors / Sub-Contractors / Clients and Authorities for design and with other internal stakeholders to ensure smooth execution of project including monitoring Workers’ and Subcontractor’s’ work progress.
• Ensure timely submission of monthly progress claim.

Requirements:

• Diploma or Degree in Mechanical Engineering or other equivalent certificates, with Project execution & management knowledge.
• Minimum 5 years’ field experience in Construction industry managing multi-disciplinary projects in semiconductors or pharmaceutical industry with some experience in a subcontracting firm. Candidates with no prior experience but with relevant working Mechanical Engineering knowledge are welcome to apply.
• Have core competency in any one of the below Mechanical Services and a good working knowledge on the others:
  • HVAC System,
  • Fire Protection System,
  • Plumbing & Sanitary System
  • Process system (Hookup)
• Excellent understanding of commercial Mechanical & Electrical systems.
• Good working knowledge in construction contract / commercial term and condition.
• Proficient in MS Office applications.
• Strong leadership and organizational skills and experienced in managing staff.
• Excellent oral and written communication skills in English (including technical writing and presentations) with ability to communicate and collaborate effectively with technical and senior management staff.
• Able to work independently with minimum supervision and a dedicated team player.
• Highly motivated individuals with the ability to maintain confidentiality of sensitive information.

The ACMV Engineer shall manage ACMV engineering works & team from project start to finish which encompasses tender preparation, submission, clarification, system design, budgeting, project management, site coordination, client management and worker management with a strong leadership and organizational skills.

The scope shall encompass the following:

Job description:

• Responsible in managing all ACMV engineering works for the projects from concept stage, design development, contract documentation, authority submissions, site administration, and project management to project completion.
• Lead and manage the team including performance appraisal and manpower planning for the project.
• Prepare scope of work, sub-contracts, and customer proposals including Preliminary Design and Tender preparation, submission and Tender Clarification follow up for ACMV works.
• Prepare and monitor project budgets for ACMV works including equipment selection, etc.
• Participate in engineering process to control cost and client budget requirements of project.
• Develop ACMV works’ project schedule and monitor/update as project progresses, and forecasting engineering activities and procurement of materials required for project to ensure timely completion of project.
• Preparing and providing technical interpretation of design documents in support of installation such as checking of drawings, preparation of data sheets for client approval, project BOM, SOW for subcontractor.
• Design and detailed design including equipment selection, duct and pipe sizing, and work with drafting team on the development of construction and shop drawings.
• Review method statement for construction activities and Safe Work Procedure for operational plant & Construction site.
• Provide specific expertise for problem solving of mechanical issues.
• Provide technical evaluation of subcontractor and equipment proposals.
• Monitor and inspect construction to ensure compliance with design documents.
• Perform Testing & Commissioning works.
• Coordination and liaise with Architects/ Consultants / Main Contractors / Vendors / Sub-Contractors / Clients and Authorities for design and with other internal stakeholders to ensure smooth execution of project including monitoring Workers’ and Subcontractor’s’ work progress.
• Ensure timely submission of monthly progress claim.

Requirements:

• Diploma or Degree in Mechanical Engineering or other equivalent certificates, with Project execution & management knowledge.
• Minimum 5 years’ field experience in Construction industry managing multi-disciplinary projects in semiconductors or pharmaceutical industry with some experience in a subcontracting firm. Candidates with no prior experience but with relevant working Mechanical Engineering knowledge are welcome to apply.
• Have core competency in any one of the below ACMV Services and a good working knowledge on the others:
  • HVAC System,
  • Fire Protection System,
  • Plumbing & Sanitary System
  • Process system (Hookup)
• Excellent understanding of commercial ACMV, electrical, plumbing, and mechanical systems.
• Good working knowledge in construction contract / commercial term and condition.
• Proficient in MS Office applications.
• Strong leadership and organizational skills and experienced in managing staff.
• Excellent oral and written communication skills in English (including technical writing and presentations) with ability to communicate and collaborate effectively with technical and senior management staff.
• Able to work independently with minimum supervision and a dedicated team player.
• Highly motivated individuals with the ability to maintain confidentiality of sensitive information.

The ACMV Manager shall be in charge of leading ACMV engineering works & team from project start to finish which encompasses tender preparation, submission, clarification, system design, budgeting, project management, staff development, client management and worker management with a strong leadership and organizational skills

The scope shall encompass the following:

Job description:

• Leading all ACMV engineering works for the projects in the company.
• Oversee project team and appraise their performance and ensure project are completed according to project schedule.
• Prepare scope of work, sub contracts, and customer proposals including Tender preparation, submission and Tender Clarification follow up for ACMV works.
• Prepare and monitor project budgets for ACMV works including system design and equipment selection to ensure it meets the tender specification.
• Participate in engineering process to control cost and client budget requirements of project.
• Develop ACMV works’ project schedule and monitor/update as project progresses.
• Provide technical interpretation of design documents in support of installation (i.e. shop drawings) and technical report writing.
• Monitor and inspect construction to ensure compliance with design documents.
• Provide specific expertise for problem solving of electrical issues.
• Coordination and liaise with Architects/ Consultants / Main Contractors / Vendors / Sub-Contractors / Clients and Authorities for design and with management team & other internal stakeholders to ensure smooth execution of project.
• Provide evaluation & assessment of subcontractor progress claim and performance.
• Ensure timely submission of monthly progress claim.
• Training & development of staff.

Requirements:

• Diploma or Degree in Mechanical Engineering or other equivalent certificates.
• Minimum 10 years’ field experience in Construction industry managing CSA and MEP projects and some experience working in subcontracting firm.
• Minimum 10 years’ experience in a leadership role in construction project management.
• Excellent understanding of commercial ACMV, electrical, plumbing, and mechanical systems.
• Good working knowledge in construction contract / commercial term and condition.
• Proficient in MS Office applications.
• Strong leadership and organizational skills and experienced in managing and developing staff.
• Excellent oral and written communication skills in English (including technical writing and presentations) with ability to communicate and collaborate effectively with technical and senior management staff.
• Highly motivated individuals with the ability to maintain confidentiality of sensitive information. 

The Electrical Manager shall be in charge of leading the Electrical engineering works & team from project start to finish which encompasses tender preparation, submission, clarification, system design, budgeting, project management, staff development, client management and worker management with a strong leadership and organizational skills.

The scope shall encompass the following:

Job description:

• Leading all Electrical engineering works for the projects in the company.
• Oversee project team and appraise their performance and ensure project are completed according to project schedule.
• Prepare scope of work, sub contracts, and customer proposals including Tender preparation, submission and Tender Clarification follow up for Electrical works.
• Prepare and monitor project budgets for Electrical works including system design and equipment selection to ensure it meets the tender specification.
• Participate in engineering process to control cost and client budget requirements of project.
• Develop Electrical works’ project schedule and monitor/update as project progresses.
• Provide technical interpretation of design documents in support of installation (i.e. shop drawings) and technical report writing.
• Monitor and inspect construction to ensure compliance with design documents.
• Provide specific expertise for problem solving of electrical issues.
• Coordination and liaise with Architects/ Consultants / Main Contractors / Vendors / Sub-Contractors / Clients and Authorities for design and with management team & other internal stakeholders to ensure smooth execution of project.
• Provide evaluation & assessment of subcontractor progress claim and performance.
• Ensure timely submission of monthly progress claim.
• Training & development of staff.

Requirements:

• Diploma or Degree in Mechanical / Electrical Engineering or other equivalent certificates. LEW certification an added advantage.
• Minimum 10 years’ field experience in Construction industry managing CSA and MEP projects and some experience working in subcontracting firm.
• Minimum 10 years’ experience in a leadership role in construction project management.
• Excellent understanding of commercial M&E systems.
• Good working knowledge in construction contract / commercial term and condition.
• Proficient in MS Office applications.
• Strong leadership and organizational skills and experienced in managing and developing staff.
• Excellent oral and written communication skills in English (including technical writing and presentations) with ability to communicate and collaborate effectively with technical and senior management staff.
• Highly motivated individuals with the ability to maintain confidentiality of sensitive information.  

The Project Manager shall be in charge of leading the project team and managing the project to completion accordingly to project schedule, including resolving of operational issues and liaising with clients, subcon, suppliers and internal stakeholders.

 The job scope shall encompass the following:

Job description:

• Prepare Project schedule, forecasting engineering activities and procurement of materials required for project to ensure timely completion of project.
• Oversee project team and appraise their performance and ensure project are completed according to project schedule.
• Assigned tasks and dead line, Conflict management, problem solving, prioritising, resources allocation and decision making 
• Oversee the overall planning of M&E works, site inspection, variation order and certification of work done for all assigned projects.
• Prepare and monitor project budgets to control cost and kept to clients’ budget requirements and ensure timely submission of monthly progress claim.
• Monitor the work progress of engineers, coordinators and sub-contractors and ensure M&E works are in compliance to the Company’s and authorities’ requirements and schedule.
• Plan and oversee testing, commissioning of the systems and activities, provide advice and decision on all project related matters such as reviewing of project related drawings and other materials prepared by the Engineers and Coordinators to ensure there is no discrepancies and/or conflicts with the architectural and structural elements.
• Provide technical write up before submitting for tender submissions.
• Review quotations and discount for approval by management for tender submission.
• Oversee the invitation of sub-contractors for tenders.
• Escalation of project matters and concerns to management team.
• Monitor the project safety (EHS matter) & QMS (Quality Management), make precise decision to stop, enhance or move forward whenever necessary.
• Any other adhoc duties as assigned.

Requirements:

• At least 5 years of relevant experience as CM or PM in Construction industry, preferably with Semiconductors/Pharmaceutical industry exposure.

• Minimum Degree in Mechanical Engineering with at least 3 years relevant experience.
• Must have valid CIDB SICW/e-SICW qualification as either Site Supervisor or Construction Manager.
• Proficient in MS Office applications such as Microsoft Word, Excel, Power Point and Outlook.

• Prefer to have clean room construction experience but not a must.
• Good working knowledge of construction industry.

• Good interpersonal skills and leadership skills.
• Good English communication skills and report writing skills.
• Both a team player and the ability to work independently.
• Highly motivated individuals with the ability to maintain confidentiality of sensitive information.

The Project Engineer shall be in charge of managing the project team and project to completion accordingly to project schedule, including resolving of operational issues and liaising with clients, subcon, suppliers and internal stakeholders.

The job scope shall encompass the following:

Job description:

• Prepare Project schedule, forecasting engineering activities and procurement of materials required for project to ensure timely completion of project.
• Oversee the overall planning & management of M&E works, site inspection, variation order and certification of work done for all assigned projects.
• Plan and oversee manpower allocation, resources allocation and conflicts management including managing & appraising work performance of supervisors, workers & subcons.
• Plan and oversee testing & commissioning of the systems and activities, provide advice and decision on all project operational related matters including reviewing of project related drawings and other materials prepared by the Drafters or Coordinators to ensure there is no discrepancies and/or conflicts with the architectural and structural elements.
• Monitor and inspect projects such as Mechanical / Process Piping, Plumbing & Sanitary system, HVAC system and Fire Protection systems to ensure compliance with design documents and statutory requirements.
• Prepare and monitor project budgets to control cost and kept to clients’ budget requirements and ensure timely submission of monthly progress claim.
• Preparing and providing technical interpretation of design documents in support of installation such as checking of Piping / Ducting layout, Isometric and schematic drawings, and pipeline stress analysis report, etc.
• Provide assistance in procurement of mechanical equipment like valve, piping and filters and coordinate with vendors on technical matters.
• Ensure timely submission of monthly progress claim.
• Escalation of project matters and concerns to management team.
• Monitor the project safety (EHS matter) & QMS (Quality Management), make precise decision to stop, enhance or move forward whenever necessary.
• Any other adhoc duties as assigned.

Requirements:

• At least 2 years of relevant experience as Project Engineer in Construction industry, preferably with Semiconductors/Pharmaceutical industry exposure.
• Minimum Degree in Mechanical Engineering with at least 3 years relevant experience.
• Must have valid CIDB SICW/e-SICW qualification.
• Proficient in MS Office applications such as Microsoft Word, Excel, Power Point and Outlook.
• Prefer to have clean room construction experience but not a must.
• Good working knowledge of construction industry.
• Good interpersonal skills and leadership skills.
• Good English communication skills and report writing skills.
• Both a team player and the ability to work independently.
• Highly motivated individuals with the ability to maintain confidentiality of sensitive information.

Job description:

• Monitor and inspect projects such as Mechanical / Process Piping, Plumbing & Sanitary system, HVAC system and Fire Protection systems to ensure compliance with design documents and statutory requirements.
• To manage multiple projects in various stage of activities including the preparation of scope of work, sub contracts, and customer proposals.
• To prepare and monitor project budgets to control cost and kept to clients’ budget requirements.
• Planning project schedule, forecasting engineering activities and procurement of materials required for project to ensure timely completion of project.
• Preparing and providing technical interpretation of design documents in support of installation such as checking of Piping / Ducting layout, Isometric and schematic drawings, and pipeline stress analysis report, etc.
• Perform detailed engineering drawings such as P&ID, piping GA, isometric, support, access ram and  ladder, MTO, pipe wall thickness calculation, valve datasheet, pipe line data, stress analysis report. 
• Provide assistance in procurement of mechanical equipment like valve, piping and filters and coordinate with vendors on technical matters.
• Ensure timely submission of monthly progress claim.

Requirements:

• Diploma/Degree in Mechanical Engineering or related discipline.
• Minimum 4 years’ relevant experience in Construction (Engineering) project management for Semi-con, Chemical Plants and Oil & Gas industry.
• Knowledge in ACMV, Ducting, Process Piping, and other M&E related systems.
• Highly motivated individuals with good organizational skills and leadership skills.
• Proficient in MS Office applications (ie. Microsoft Excel).

Job description:

• Assist Project Engineers & Managers in monitoring and inspecting construction works to ensure compliance with design documents and statutory requirements.
• Assist in preparing and monitoring project budgets, and ensure timely submission of monthly progress claim.
• Assist in preparing the engineering drawings, datasheets and reports such as piping layout design, pipeline stress analysis report, MTO and datasheets.
• Assist in monitoring and inspecting projects such as Mechanical / Electrical, Piping and Fire Protection systems to ensure compliance with design documents.
• Assist in overseeing the work progress of workers and sub-contractors.
• Assist in procurement of mechanical equipment like valve, piping and filters and coordinate with vendors on technical matters.
• Coordinate with clients, suppliers, subcontractors and other departments to ensure smooth completion of the project including monitoring Workers’ and Subcontractors’ work progress.

Requirements:

• Diploma/Degree in Mechanical Engineering or related discipline.
• Minimum 1-2 years’ relevant experience in Construction (Engineering) project management for Semi-con, Chemical Plants and Oil & Gas industry. Those with no experience may also apply as training will be provided.
• Knowledge in ACMV, Ducting, Process Piping, and other M&E related systems.
• Highly motivated individuals with good organizational skills and communication skills.
• Proficient in MS Office applications (ie. Microsoft Excel).

Job description:

• Provide administrative support for site personnel including site-related documentation and record management.
• Administer transmittal documents, controlling the numbering, filing, sorting and retrieval of electronically stored and hard copy project documentation.
• Ensure controlled copies of latest approved documents and drawings are submitted to the appropriate parties.
• Notify personnel of updated document versions and how to access them.
• Plan and organize internal and external meetings.
• Coordinate with various project stakeholders including clients, supervisors, project staff and main office.
• Manage and maintain site office inventory & pantry supplies.
• Organise site events such as catering for safety campaigns.
• Other ad-hoc duties assigned.

Requirements:

• Minimum 5 years’ relevant administrative experience, preferably in Construction/Civil industry.
• NITEC or Diploma in Business/Engineering or other relevant qualifications.
• Proficient in English in writing and good communication skills.
• Proficient in MS Office such as MS Word, MS Excel and MS Outlook.
• Able to work independently and is meticulous.

Job description:

• Perform regular inspections pertaining to Welding and Pipefitting projects.
• Ensure progress of works is in accordance to stipulated scope of works and time schedule.
• Report outcomes and findings of all inspection works to Project Team on a regular basis to keep them updated on all quality checks and project progress.
• Provide advice and exercise any/all correction actions for any faults or issues discovered at site.
• Coordinate between various stakeholders to ensure work progress is in accordance to project schedule.
• Attend site meetings as and when required.
• Any other adhoc project duties as assigned.

Requirements:

• Diploma/Degree in Engineering related discipline or QA/QC certifications such as TWI or ASNT certificates as Welding Inspector.
• Minimum 3 years’ relevant experience in carrying out QA/QC checks for Welding and Pipefitting/ Electrical works in Semiconductor industry.
• Knowledge in ACMV, Ducting, Process Piping, and other M&E related systems.

Job description:

• Produce and prepare technical drawings such as detailed shop drawings, fabricate drawings and as-built drawings as per contract specifications.
• Coordinate, review and verify drawings including owner & subcontractor’s drawings to ensure compliance with design specifications and guidelines.
• Update and comply with the code of practice on electrical, mechanical as required.
• Attend meetings with our project team, clients, and subcontractors for project related matters.

Requirements:

• Diploma/Degree in Engineering related discipline or QA/QC certifications such as TWI or ASNT certificates as Welding Inspector.

• Minimum 3 years relevant hands-on experience in M&E projects for Semicon industry working for subcontracting firm or main-con.
• Experienced in 2D & 3D Autocad & BIM drawings for M&E, CSA, piping and Fire Protection systems.
• Able to read & understand engineering documents.
• Able to work in a fast-paced environment and both independently and in a team.

Job description:

• Responsible in supporting all Electrical engineering works for the projects.
• Prepare scope of work, sub contracts, and customer proposals including Tender preparation, submission and Tender Clarification follow up for Electrical works.
• Prepare and monitor project budgets for Electrical works including equipment selection, etc.
• Participate in engineering process to control cost and client budget requirements of project.
• Develop Electrical works’ project schedule and monitor/update as project progresses.
• Perform Testing & Commissioning works.
• Provide technical interpretation of design documents in support of installation (i.e. shop drawings).
• Provide specific expertise for problem solving of electrical issues.
• Provide technical evaluation of subcontractor and equipment proposals.
• Monitor and inspect construction to ensure compliance with design documents.
• Coordinate with relevant stakeholders to ensure smooth completion of the project.
• Ensure timely submission of monthly progress claim.

Requirements:

• At least 5 years’ experience in Construction project management for M&E projects.
• Must have at least a Degree in Mechanical or Electrical Engineering, with Design and Build knowledge; able to conduct Engineering Calculation.
• Excellent understanding of commercial Mechanical & Electrical systems.
• Strong leadership and organizational skills.
• Knowledgeable in construction policies and procedures, with field experience a must.
• Proficient in MS Office applications and experience in using ACAD and BIM a plus.
• Highly motivated individuals with the ability to maintain confidentiality of sensitive information.
• Able to work independently with minimum supervision and a dedicated team player.

Job description:

• Monitor and inspect work sites to ensure safe work practices are carried out accordingly.
• Liaise with client/main contractor on all site safety matters.
• Assist the Project Manager in all aspect of project and attend site meetings.
• Ensure all safety and quality assurance procedures and certifications are up to date and adhere to the requirements set out by the relevant regulatory bodies and compliant to the Contract work scope.
• Liaise with site staff, Project engineers/coordinators and regulatory bodies on all safety and health issues such as accident reporting, investigations and propose recommendations.
• Perform risk assessment, job safety analysis, safety procedures, documentation of safety records. 
• Any other assignments as assigned.

Requirements:

• At least 2 years of relevant experience in Construction industry.
• Must have at least one of the prescribed Workplace Safety and Health related qualification.
• Proficient in MS Office applications such as Microsoft Word, Excel, Power Point and Outlook.
• Good working knowledge of statutory requirements related to WSH Act and other aspect of safety.
• Ability to read and understand construction related drawings.
• Both a team player and the ability to work independently.
• Highly motivated individuals with the ability to maintain confidentiality of sensitive information.
• Candidates must be willing to travel within Singapore.